Getting Started

Pre-Installation Checklist

Configuring Per-Camera Plug-In Settings

1. After binding the plug-in to cameras, links will appear under Bound Cameras for each camera.

2. Click a link (for example Edit “7. Lobby”) to edit the settings for that camera.
   

   Image Added

3. The following settings must be configured for each camera bound to the Dwell plug-in:

Drawing Dwell Zone

For each camera that is bound to the Dwell plug-in, you must define at least one dwell zone that will be analyzed for Dwell events.
Zones are specified in the Dwell Zone tab of the Edit Settings window.

Registering with System License Key

Installing Dwell Plug-In

1. Launch 3VR System Manager.

2. In the Configure panel, click the plus sign beside the appliance name.

3. Right-click the Plug-ins folder and select Add Plug-in.

4. In the resulting Confirm dialog box, click Install to proceed.

5. Navigate to the folder containing the plug-in file
   (Plugins.Dwell-Release-7.0.xxxxx.3pg) and click to highlight the file.

6. Click OK. The plug-in will now begin installing.

7. When the plug-in is installed, it will appear below Plug-ins in System Manager.

Binding Cameras to Plug-in

Entering Dwell License Key

The next step in plug-in configuration is to license the Dwell plug-in.

1. In the Configure panel, select the plug-in name to view its settings.

2. Click Edit Settings.

   

3. Copy (select the text and press Ctrl+C) the 23-character code from the Licensing Question field in the Edit Global Settings dialog.

4. Paste (press Ctrl+V) the licensing question into an email to 3VR Technical Support (support@3VR.com).

5. 3VR Technical Support will respond with the matching 27-character key within 1 business day.

6. Copy (CTRL-C) and paste (CTRL-V) the key from the email into the License Key box in System Manager.

7. Click OK to save and return to the Configure panel.