Command Index By Category
- 1 System Commands
- 2 Program User Commands
- 3 Auto-Program User Commands
- 4 Program Multiple ID User CommandsÂ
- 5 Program Control User Commands
- 6 User Management Commands
- 7 Print Users Without Code Commands
- 8 Print Users With Code Commands
- 9 Time Control Commands
- 10 Access Zone Commands
- 11 Control Zone Commands
- 12 Duress Alarm Commands
- 13 Alarm / RQE Commands
- 14 Expansion Line Module Input Commands
- 15 Keypad/MATCH Commands
- 16 Expansion Relay Commands
- 17 Commands That Clear Settings Or Reset To Defaults
- 18 Reporting Commands
- 19 Remote Site Management Commands
- 20 Print System Setups And Status Commands
- 21 Maintenance Commands
- 22 Host-Based Commands
System Commands
CMD | Function |
00 | Print Lists Of Commands |
01 | Change System Code |
02 | Add Programming Passwords |
99 | Quit Programming (for use from keypad) |
Program User Commands
CMD | Function |
10 | Add Access User (KEYPAD Only - IDF 1) |
11 | Redefine Access User |
12 | Change Any User Access or Control Zone |
13 | Change Any User CODE |
15 | Add Unlock/Relock User |
16 | Delete Any User |
310 | Add Access User (CARD Only - IDF 2) |
311 | Add Access User (DUAL Only - IDF 3) |
316 | Test CARD During Programming |
325 | Change Range of Users To New Function And Zone |
Auto-Program User Commands
CMD | Function |
18 | Change CODE Length For Auto-Generation |
19 | Auto Add Access User (Auto-Gen Code) |
20 | Auto Add Access User (Auto-Select User Number) |
21 | Auto Add Multiple Access Users (Auto-Gen Code & User Number) |
22 | Auto Add Multiple Access Users (Auto-Gen From Specified User Number) |
23 | Delete Range Of Users |
Program Multiple ID User CommandsÂ
CMD | Function |
312 | Add Access User - CARD & DUAL (IDF 4) |
313 | Add Access User - KEYPAD & DUAL (IDF 5) |
314 | Add Access User - KEYPAD & CARD (IDF 6) |
315 | Add Access User - KEYPAD & CARD & DUAL (IDF 7) |
Program Control User Commands
CMD | Function |
40 | Add Relay Control User |
41 | Add Top-Priority Relay Control User |
42 | Add Alarm Control User |
43 | Add Keypad Index Control User (IDF 1) |
44 | Add Special Control User |
User Management Commands
CMD | Function |
46 | Change Passback Mode |
47 | Forgive Passback For User |
48 | Forgive Passback/Occupancy Count For All Users |
49 | Tag Any User |
146 | Disable Passback/Occupancy Count During Time Zone |
149 | Alert Users |
235 | Change Occupancy Count Limits |
236 | Trigger Control Zone On Change In Occupancy Count |
237 | Change Occupancy Threshold For Auto-Disable Of 2-Person Access Rule |
238 | Single Zone Access |
246 | Define Passback Zone |
255 | Change 2-Person-Access-Rule |
256 | Change 2-Person-Access-Rule Mode For Relay |
257 | Disable 2-Person-Access-Rule During Time Zone |
350 | Auto-Delete On Expiration For Users |
351 | Use Count Mode For Users |
352 | Set Use Count For Users |
353 | Absentee Rule Mode For Users |
354 | Set Max Days Absent For Users |
355 | Forgive Absentee Users |
356 | Temporary-Day Mode For Users |
357 | Set Days For Temporary-Day Users |
358 | Set Deadman Timer |
420 | Enable/Disable Users Special Options |
425 | Change Range of Users to New Function and Zone |
426 | Define Function Groups |
427 | List Function Groups |
Print Users Without Code Commands
CMD | Function |
30 | Print User Without CODE |
31 | Print Users Without CODE |
32 | Print First Available User Number |
33 | Print Users Given Access or Control Zone |
34 | Print Families Of Users Without CODE |
Print Users With Code Commands
CMD | Function |
35 | Print User With CODE |
36 | Print Users With CODE |
37 | Print User Given CODE |
38 | Print Families Of Users With CODE |
330 | Print Setups And Status By Printout Style For Families Of Users |
Time Control Commands
CMD | Function |
50 | Set Date & Day Of The Week |
51 | Set Time |
52 | Define Standard Time Zone |
54 | Define Master Time Zone |
56 | Clear Time Zone |
57 | Define Holiday |
58 | Clear Holiday |
59 | Clear All Holidays |
154 | Define Grand Master Time Zone |
454 | Define Master and Grand Master Time Zones |
Access Zone Commands
CMD | Function |
17 | Define Standard Access Zone - 1 Time Zone All Doors |
24 | Define Standard Access Zone - 1 Time Zone Per Door |
117 | Define Standard Access Zone - 1 Time Zone Specified Doors Only |
204 | Define Master Access Zone |
217 | Clear Access Zone |
249 | Tag Access Zone |
349 | Alert Access Zone |
421 | Set Users Special Options |
422 | Set Users Custom Access Zone |
Control Zone Commands
CMD | Function |
45 | Define Standard Control Zone |
301 | Add Expansion Alarm Or Relay To Standard Control Zone |
302 | Remove Expansion Alarm Or Relay From Standard Control Zone |
303 | Change Time Zone Of Standard Control Zone |
304 | Define Master Control Zone |
305 | Define Time Zone For Master Control Zone |
306 | Clear Master Control Zone |
307 | Define Linked Zones for Master Control Zone |
345 | Clear Standard Control Zone |
449 | Tag Control Zone |
549 | Alert Control Zone |
Duress Alarm Commands
CMD | Function |
07 | Change Duress Digit |
08 | Change Duress Alarm Mode |
09 | Generate CODEs With Duress Digits |
13 | Change Keypad User Code and Duress Digit |
14 | Add or Change Duress Digit for User or Range of Users |
Alarm / RQE Commands
CMD | Function |
70 | Enable Selected Line Module Inputs |
71 | Disable Selected Line Module Inputs |
72 | Change Selected Line Module Inputs |
73 | Change Selected RQEs |
74 | Change Door Open-Too-Long Interval |
75 | Door Open-Too-Long Active While Unlocked |
76 | Mask Line Module Input During Time Zone |
77 | Change CODE Tamper |
78 | Change Alarm Relay Mapping |
79 | Change Time For Alarm Relay |
84 | Line Module Input Triggers Control Zone |
110 | Change Entry/Exit Delay For Line Module Input |
112 | Disable Entry Delay For Line Module Input During Time Zone |
259 | Change Special Modes for Line Module Input |
260 | Print Alarm Action |
261 | Define Alarm Actions |
262 | Alarm Condition Triggers Control Zone |
263 | Reset Alarm Actions To Factory Settings |
270 | Change Line Module For Line Module Input |
273 | Disable RQE During Time Zone |
373 | Disable Expansion RQE During Time Zone |
460 | Print Action Control Blocks |
461 | Action Control Block Options |
Expansion Line Module Input Commands
CMD | Function |
111 | Change Entry/Exit Delay Time For Expansion Line Module Input |
113 | Disable Entry/Exit Delay Time For Expansion Line Module Input During Time Zone |
170 | Enable Expansion Line Module Input |
171 | Disable Expansion Line Module Input |
172 | Change Expansion Line Module Input |
173 | Change Expansion RQE |
174 | Change DOTL Timer Of Expansion Line Module Input |
175 | Expansion DOTL Always Active |
176 | Mask Expansion Line Module Input During Time Zone |
180 | Change Door Time For Expansion Line Module Input |
184 | Expansion Line Module Input Triggers Control Zone |
186 | Change Expansion Line Module Input Reporting Mode |
370 | Change Line Module For Expansion Line Module Input |
Keypad/MATCH Commands
CMD | Function |
03 | Change Selected Keypad / MATCH Functions |
103 | Change Selected MATCH Functions |
104 | Enable CARD-Only At Dual Technology Reader During Time Zone |
247 | Change Reader Threat Level Settings |
405 | Define Custom Card Reader Configuration |
79 | Change Time For Alarm Relay |
80 | Change Door Time for Relay |
81 | Change Control Time Of Relay |
82 | Time Zone Control Of Relay |
83 | Clear Time Zone Control Of Relay |
85 | Change Line Module Input/Relay Contacts for Selected Relays |
86 | Change Relay & Line Module Input Operating/Reporting Mode |
87 | Relay Triggers Control Zone |
274 | Change Door-Open-Too-Long Warning |
280 | Change Access Delay Time For Door Relay |
281 | Change Control Delay Time For Control Relay |
282 | Define Special Needs Unlock Extensions |
283 | Change Timer for Relay in 1/4 Seconds |
284 | Change Extended Access Time for Relays |
479 | Change Time for Alarm Relays |
Expansion Relay Commands
CMD | Function |
181 | Change Control Time For Expansion Relay |
182 | Time Zone Control Of Expansion Relay |
183 | Clear Time Zone Control Of Expansion Relay |
184 | Expansion Line Module Input Triggers Control Zone |
185 | Change Line Module Input/Relay Contacts Of Expansion Relay |
187 | Expansion Relay Triggers Control Zone |
374 | Change Expansion Door Open Too Long Warning Time |
381 | Change Control Delay Timer Of Expansion Relay |
383 | Change Timer for Expansion Relay in 1/4 Seconds |
Commands That Clear Settings Or Reset To Defaults
CMD | Function |
56 | Clear Standard, Master Time Zones |
59 | Clear Holidays |
98*18 | Host Restore Setup - Clear all Time Zones, ACBs, Access Zones, Control Zones. |
98*26 | Reset Setups – Clear all Keypad Setups, Match Readers, Relays and Expansion Relays, Alarm Inputs and Expansion Inputs, Alarm Relay Times, and various miscellaneous setups. |
217 | Clear Standard or Master Access Zone(s) |
306 | Clear Master Control Zone(s) |
345 | Clear Standard Control Zone(s) |
Reporting Commands
CMD | Function |
05 | Reporting Modes |
06 | Disable Report Of Grants |
105 | Disable Device During Time Zone |
106 | Disable Reporting During Time Zone |
107 | Daily Report Mode |
109 | Invalid Code Reporting Mode |
140 | Set Report Buffer Alarm Threshold |
Remote Site Management Commands
CMD | Function |
108 | Time Zone Control Of Modem |
193 | Set Host Phone Number |
194 | Set Tone Or Pulse Dialing |
195 | Change Host Call Back |
Print System Setups And Status Commands
CMD | Function |
88 | Print System Setups and Status |
Maintenance Commands
CMD | Function |
90 | Maintenance |
191 | Change Page Length For Printer |
192 | Change Programming Time-out Interval |
200 | Change Printer Language |
Host-Based Commands
CMD | Function |
98 | Upload/Download Setup Commands |
198 | Host-Generated Commands |
435 | Define Occupancy Count Limits from Host |
436 | Define Occupancy Count Control Zones from Host |
450 | Set Date and Time From Host |
457 | Define Holidays From Host |