Appendix A: Controller Command Reference

Owned by Murugasamy S
Last updated: Mar 08, 2022 by Del Gonzalez
1 min read

 

Note: this command reference is provided for historical reference and troubleshooting purposes only. Please use the Velocity software for configuring your controllers. See: https://identivdocs.atlassian.net/wiki/x/R4G7B

Overview


This chapter details the Hirsch programming commands. It includes all the commands included in v7.0 and v8.0.

The Controller Command Reference is divided into these sections:

 

Command Reference

The following section provides detailed information on all the commands used in the DIGI*TRAC Control Language (DCL).

The topics covered for each command are:

  • Syntax

  • Variables (where appropriate)

  • Description

  • Examples

  • Defaults

  • Related Commands

In the following section, the square bracket [ ] is used to indicate that the variable or parameter is optional and need not be included unless necessary.

The icon in the Related Commands subsection of each command indicates the command used to print out the current settings for the specific command.

Host-Based Commands

While there are several host-based commands—those commands which must be sent by a host computer—the most significant which can be used from Velocity Command Sets or Diagnostic Mode by a qualified operator is CMD 98.