Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Installation Preparation

Hardware Requirements

  • Advantec ADAM 6050 digital I/O device (12 inputs, 6 outputs)

  • Ethernet cable

Software Requirements

  • ADAM Digital I/O plug-in file: Plugins.AdamDIO-Release-1.0.0.xx-7.x.x.3pg

  • ADAM configuration utility: Advantech AdamApax .NET Utility Ver 2.04.04.exe included on a disc in the box with the ADAM device, or can be downloaded from Support.Advantech.com.

Configuring ADAM Digital I/O Device

  1. Connect the ADAM 6050 to the network with the Ethernet cable.

  2. Launch the Adam Apax .NET Utility.

  3. Right-click your computer’s IP address (under Ethernet) and select Search. The utility will then search the network for ADAM modules on the network.

  • No labels