uTrust Premises Solution with Edge EVO

Installation Guide of the Edge EVO Integration

Overview

This document provides information about the integration to Velocity that completes the uTrust Premises Solution with Edge EVO. This integration is an optional software component that provides the interface between Velocity and one or more Edge single-door controllers. This integration enables you to configure and manage your Edge controllers (and their associated Edge holidays, holiday groups, schedules, and door groups) from Velocity.

The following table shows the compatible version of this integration for Velocity’s recent releases.

The following diagram shows the key components of a uTrust Premises Solution with Edge EVO for a new protected area:

Open

Although the previous diagram shows an example of a protected area secured by a metal door, an Edge controller can be used for other applications where only a single entry reader is needed, such as a private parking area, a storage room for confidential documents, or a server cage in a data center. Note that power can be provided through a Power Over Ethernet (POE) connection, or a separate 12 VDC or 24 VDC power supply. The uTrust Premises Solution with Edge EVO uses a migration uTrust TS card reader that supports a variety of low-frequency or high-frequency credentials.

After you install this optional integration, it extends the Velocity user interface to include numerous features which are documented in a context-sensitive help system that is delivered in a file named EdgeIntegration.chm. Be sure to read that help system for important information about how to configure and use your Edge EVO system.

In this document, there is information about:

• System Requirements

• Installing and Configuring this Integration

• The New Features, Bug Fixes, and Known Issues in this release

System Requirements

Besides this Edge EVO Integration, your system must include the following components:

• A physical access control system with various hardware components controlled by the uTrust Velocity security management system software

• An Edge EVO system with a single-door controller, a card reader, and some card credentials

• A network with a Power Over Ethernet (POE) connection for the Edge controller, or a separate 12 VDC or 24 VDC power supply

Installing this Integration

The optional Edge EVO Controller Integration must be installed after the Velocity installation. After installing the integration, you must also perform a few configuration and setup tasks.

Installing the Edge EVO Controller Integration

To install the Edge EVO integration after Velocity 3.6 SP2 has been installed, perform the following steps.

1.Go to the Technical Support page at https://support.identiv.com/products/physical-access/hirsch/ click on the Velocity 3.6 — Documents and Downloads link, then on the resulting page click on the Download link for Velocity 3.6 Edge EVO Integration (version 1.0.3.3).

2. Open the folder where you downloaded the integration, and run the installation program for the Edge EVO integration. For example: Velocity_EdgeEVO_Integration_1.0.3.3.exe

You might see the following message displayed while the Velocity Update Wizard checks that you have the administrative privileges needed for this installation.

Open

3. When the following dialog is displayed:

• If you want to back up your Velocity database now, click the Yes button.

• If you want to skip the database backup (and continue with the installation), click the No button.

4. When the following dialog is displayed:

• If you want to have all the Velocity services (including the Edge EVO service) started after the installation has completed, click the Yes button.

• If you want to wait and manually start the Velocity services at a later time, click the No button.
  
  

Progress messages such as the following are displayed next:

5. When the following Application Settings screen appears, enter the Service Account and the Password, and click the OK button.

This is the same account information that was specified (on the Application Network and Security screen) during the Velocity installation.

• The Service Account is the user account that is used to start all the Velocity Services, including the new EdgeService of the Edge EVO Controller Integration

• The Password is the password that the specified Service Account will use to log on

Progress messages such as the following are displayed next:

6. When the following screen appears, click Install.

Progress messages such as the following are displayed next:

7. When the following screen appears, click Close.

8. Because the necessary version of Java was just installed, you can close the Verify Java Version tab of your Web browser (which was opened by the Java Setup program).

The final progress messages should be displayed next:

9. Click the OK button to close these two dialogs

After the integration has finished installing, ensure that:

• The EdgeService program is allowed through your firewalls, and that network ports 4050, 4070, and 4999 are not blocked by your firewalls

• The Edge EVO service is running

Ensuring that the Edge EVO System is Allowed Through Your Firewalls

Because the Edge EVO system communicates across a shared network (instead of a dedicated physical security network), you will have to work with your network administrator to ensure that the EdgeService program is allowed through your firewalls, and that network ports 4050, 4070, and 4999 are not blocked by your firewalls. Some networks use the software firewall provided with Microsoft Windows, other networks use a software firewall provided by a different vendor (as shown in the following image), and high-security networks include hardware firewalls.

Because the firewalls on a network can vary so much, we cannot provide a detailed procedure for your specific network. But the following example for the Windows Firewall should help illustrate the general process.

1. Open the Windows Control Panel, and in the System and Security section, click on the link to Allow a program through Windows Firewall.

2. In the resulting dialog, click the Allow another program... button

3. In the resulting Add a Program dialog, click the Browse... button

4. In the resulting Browse dialog, navigate to the folder where Velocity was installed, select the EdgeService.exe program, and click the Open button

5. Back in the Add a Program dialog, click the Add button

6. Verify that EdgeService appears in the list of Allowed programs and features, and click OK

7. Navigate to the Windows Firewall page of the Control Panel, and click on the Advanced settings link

8. In the resulting Windows Firewall with Advanced Security dialog, define any necessary Inbound Rules and Outbound Rules for the EdgeService to use network ports 4050, 4070, and 4999

Ensuring that the Edge EVO Service is Running

After you install the Edge EVO Controller Integration, you should use Velocity's Service Control Manager to verify that the Edge EVO service is running. The state of the Velocity Services after the installation depends on your response to this question during the installation:

Right-click on the Velocity Service Control Manager icon in the Windows taskbar, and look at the commands on the pop-up menu:

• If you see a command to Start Velocity Edge EVO Service, click on it

• If you see a command to Stop Velocity Edge EVO Service, the service is already running, and you should click outside the pop-up menu to close it

If necessary, restart the other Velocity Services.

Release Notes for version 1.0.3.3

New Features

The 1.0.3.3 release of this integration contains the following new feature.

Support for 26-bit prox cards

Previously, the Edge EVO Integration only supported card data passthru, and could not handle the MATCH code generated by the 26-bit Wiegand card format. This meant that separate credentials were required for the Edge controllers.

Now 26-bit prox cards are supported by the Edge EVO Integration, so the same credentials can be used at either Mx controllers or Edge controllers. If this is what you want to do, then specify it as a system-wide setting by selecting the Std 26-bit Wiegand option from the Card Type drop-down list on the Edge Configuration dialog.

To reach the Edge Configuration dialog, in the Administration pane of Velocity's main window, select the Configuration > Edge EVO Configuration folder in the system tree, and then double-click the Edge Configuration item in the Components pane.

Bug Fixes

The 1.0.3.3 release of this integration contains the following bug fix.

Known Issues with the Edge EVO Integration (or the Edge controller’s firmware)