Installation and Configuration
Installing Ticketech Plug-in on 3VR Appliances
Launch 3VR System Manager.
In the Configure panel, click the plus sign beside the appliance name.
Right-click the Plug-ins folder and select Add Plug-in.
In the resulting Confirm dialog box, click Install to proceed.
Navigate to the folder containing the plug-in file (Plugins.TicketechTCPTransaction-Release-1.0.0.XXXXX-7.0) and click to highlight the file.
Click OK. The plug-in will now begin installing.
When the plug-in is installed, it will appear below Plug-ins in System Manager.
Binding Cameras to Plug-In
Select the Ticketech Transaction Application plug-in.
Click the Bound Cameras field, then click the ... button.
In the Bind Plug-in to Cameras dialog box, click the check box beside each camera that you wish to link to data from Ticketech.
Click OK to save your changes and return to the Configure panel.
A pop-up will be displayed notifying you that the 3VR system software must be restarted after making changes. Click OK to close the pop-up message and acknowledge the warning. You will restart software as the last configuration step.
Entering Source IDs
After binding cameras to the plug-in (step 2), links will appear under Bound Cameras for each camera.
Click a link (for example Edit “8. Garage West”) to edit the settings for that camera.
Type the Source ID for the Ticketech location and device that will be associated with this camera. The Source ID must be in [Ticketech Location ID]-[Ticketech Workstation ID] format.
For example, if the Location ID is DBF032 and the Workstation ID is 21, you would type DBF032-21 in the Source ID box.
To associate multiple Ticketech devices with a single camera, type the Source IDs of all of the devices, separated by a comma with no spaces.
To associate the same Ticketech device with multiple cameras, type the Source ID in the Edit Settings dialog for both cameras.
