Axis Network Door Controller (A1001)
This document provides the steps needed to configure Axis PACS Devices using a simplified single 3VR user interface. Administrators can use System Manager to perform the following:Create, delete, and update users.
Create, delete, and update user groups with the ability to generate schedules by selecting time periods for which they are valid
Update name, description, and associated groups of doors
Configure access types for each door, including ability to add and remove users as well as add and remove doors that can be accessed
Fully customize schedules within the Axis PACS
Setup and Configuration
Connect peripheral devices to the Axis PACS Device.
Enter the IP address of the Axis PACS Device in a web browser in order to launch the AXIS Entry Manager.
Select the “Hardware Configuration” link.
Start New Hardware Configuration.
Enter the number of connected doors as well as the names to use. Pay close attention to the name entered here as it will be necessary during the 3VR plug-in installation.
Configure the doors/locks.
Enter the reader information and click “Finish”.