Turning On the Windows Firewall_v3.8.4

Owned by Anand Rajaraman
Last updated: Feb 26, 2023
1 min read

After you have installed Velocity 3.8.4, you can turn the Windows Firewall ON and configure the firewall to accommodate access to the required SQL Server and Velocity ports. (This is required for a Velocity Client/Server installation, but is not necessary for a Velocity standalone Workstation installation.)

If you are unfamiliar with firewall port configuration, contact your IT department for more information about doing this.

In many circumstances, you will have to perform the following procedures in this section: