Return Label

Instructions

Steps to create a return label:

1. Log into UPS using campusship.ups.com.

   1. Group ID: 3VR_RMA

   2. Password: 3VRsecurity

      

2. Using the task bar on the left, select “Create a Return”.

3. “Where is this return shipping coming from?” either select the drop-down and look for the address the tech gave you or you can create a new one by selecting “Enter New Address.

   1. When selecting “Enter New Address” make sure you use tech support’s phone and email in the lines provided for this.

4. “Where is this return shipment going to?” leave it at the default address. This should be going to 326 Charcot Ave San Jose, CA 951311104.
   For 3000 and 4000 units and components, next to the Return to Address select the “Edit” and change the address to Embedtek – New.

5. Choose “Packaging Type” and select “Other”

   1. You must put a weight here. Use the following:

      1. 5000, 5500, and P-Series – 40 lbs

      2. 3000, 4000, and S Series 2 – 30 lbs

      3. 1000, 2000, and 2100 – 20 lbs

6. The “Package Declared Value” must be blank.

7. Enter a brief description of the issue with the unit. (i.e. Degraded HDD, Failed Stretch Card, Will not boot up, etc) in “Merchandise Description” field.

   

8. The “Service” drop-down must be UPS Ground Service.

9. The “Label Deliver Method” drop-down selection must be Electronic Return Label.

10. Continue to have Charge to Department field as Technical Support.

11. Enter the RMA number.

12. Business Purpose should be the same as Merchandise Description.

    

13. The “Payment Method” drop-down selection must be V45450-3VR SECURITY INC

    

14. Click Next.