Versions Compared

Old Version 7

changes.mady.by.user Anand Rajaraman

Saved on

compared with

New Version Current

changes.mady.by.user Anand Rajaraman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Philips head #2 screwdriver
  • Replacement drive supported by 3VR with the appropriate storage capacity for the model of appliance. If you are unsure about the storage capacity of a system’s drives, email the serial number to support@3VR.com for assistance. See Appendix A to view supported hard drive models.
    • Connection to the appliance using one of the following connection methods:
      • Laptop connected to appliance using the 3VR USB-to-Ethernet Network Service Adapter
      • Network connection to the appliance
      • Monitor, keyboard, and mouse connected to the appliance

...



5. Verify that the RAID Array Status field displays “Rebuilding”.


6. Launch 3VR OpCenter and verify that the appliance appears to be functioning properly.

If new events are not being generated, or if video does not play when an event card is selected, contact 3VR Technical Support for assistance.

Info

See Appendix D for more information about hot spares on a P-Series appliance.

Within 10 minutes of initializing the rebuild:

  • The P-Series 3VR status indicator will return to solid
    white (normal) ()
  • The RAID/Disk Issue health alert in the Monitor Health tab will display the percentage remaining in the rebuild process

  • This value will be updated every 10 minutes until the system has finished rebuilding the array, at which point the health alert will state RAID array rebuild done.

    Note

    Note that the rebuild will be complete at this point, even if the Percentage Complete value displayed is not 100%.




...