Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Version

Summary of Changes

MAN001-1120

Revised the note section in 80X0 uTrust Touch Secure Mullion Reader section to indicate that readers were confirmed to annunciate the UL 1076 acknowledgement signal when they were interfaced through OSDP. It is described that communication via Ethernet has not been evaluated by UL.

Removed a statement that described there shall be no connections made to the RS-485 interface for UL installations in 80X0 uTrust Touch Secure Mullion Reader section. This statement is removed due to noncompliant test results and the readers weren’t evaluated when interfaced via RS-485.

Revised the note section in 81X0 uTrust Touch Secure Wallmount Reader section to indicate that readers were confirmed to annunciate the UL 1076 acknowledgement signal when they were interfaced through OSDP.  It is described that communication via Ethernet has not been evaluated by UL.

Removed a statement that described there shall be no connections made to the RS-485 interface for UL installations in 80X0 uTrust Touch Secure Mullion Reader section. This statement is removed due to noncompliant test results and the readers weren’t evaluated when interfaced via RS-485.

Revised the note section in 8230 uTrust Touch Secure Keypad Reader section to indicate that readers were confirmed to annunciate the UL 1076 acknowledgement signal when they were interfaced through OSDP. It is described that communication via Ethernet has not been evaluated by UL.

Removed a statement in 80X0 uTrust Touch Secure Mullion Reader, 81X0 uTrust Touch Secure Wallmount Reader, and 8230 uTrust Touch Secure Keypad Reader sections that described communication via RS-485 or OSDP is not permitted. Revised a statement to indicate that communication via Wiegand and OSDP was evaluated by UL.

Revised sections in 8330 uTrust Touch Secure Scramble Pad Reader and 8210 uTrust Touch Secure Keypad Reader to describe that UL 1076 acknowledgement signal annunciation is made only when reader is interfaced via Wiegand and OSDP only.

Revised DS47L uTrust Scramble Pad TS Reader section to describe that for UL 1076, the reader was assessed for the acknowledgement signal annunciation while interfacing to the Listed Identiv Mx series control unit via RS-HIRSCH protocol.

The previous note in 80X0 uTrust Touch Secure Mullion Reader and  81X0 uTrust Touch Secure Wallmount Reader section that described "Communication via Wiegand was evaluated by UL and serves as the interface between the reader and panel, Communication via Ethernet was not evaluated by UL" is ODSP added to show support for communication along with Wiegand.

The section in 8210 uTrust Touch Secure Keypad Reader and 8230 uTrust Touch Secure Keypad Reader that described "Communication via Wiegand was evaluated by UL and serves as the interface between the reader and panel" is OSDP added to show Communication support along with Wiegand.

The Stand by power feature of Mx-2 Rating and Mx-2-S3OB Mx-4 column and Mx-4-S3OB Rating, or Mx-8, Mx-8- S3OB Rating column in UL 294 Rating Achieved by the different models of the MX series Controller  table was revised with Level IV (with supplied 7.2 Ah battery and maximum of 12W to all peripherals) support.

The Stand by power feature of Mx-2 Rating and Mx-2-S3OB Mx-4 column and Mx-4-S3OB Rating, or Mx-8, Mx-8- S3OB Rating column in UL 294 Rating Achieved by the different models of the MX series Controller  table was revised with Level IV (with supplied 8 Ah or 9 Ah battery and maximum of 12W to all peripherals) support.

MAN001-0622

Revised by adding basic user instruction and installation procedures about 8116 uTrust Touch Secure Keypad Reader and 8216 uTrust Touch Secure Keypad Reader.