...
Prior to installing and configuring analytics, enter the system-specific license key that was provided to you at the time of purchase.
If you do not have access to the original order confirmation email, you can look up the license key by appliance serial number on the 3VR Partner Portal, go to http://partners.3VR.com and sign in with your Partner Portal account, then click the Obtain System License Key link.
After obtaining the license key, enter it in the License Settings dialog in 3VR System Manager:
...
Binding Cameras to Plug-in
...
Click the plug-in name to view its settings.
On the right side of System Manager, select the Bound Cameras field and click the ... button.
In the Bind Plug-in to Cameras dialog box, click the check box beside each camera that should have Demographics.
Click OK to return to the Configure panel.
Configuring Per-Camera Plug-in Settings
...
The camera covers an area where Demographics analysis is not desired. For example, if the camera covers a checkout line, you might draw a zone that excludes the cashier.
You wish to isolate areas in the field of view that might generate different demographics data. For example, a store with a camera covering two end-cap displays might want to compare the demographics of people attracted to each display. Note: this use case is typically only relevant when using a megapixel camera with a wide field of view.
Faces appearing in front of the camera are in the field of view for a long time, as in a long hallway. In this case, you might draw an inclusion zone only for the closest half of the camera to avoid
accidentally counting the same person twice. The image to the right exhibits this use of a zone.
If no inclusion zones are specified, the plug-in will default to analyzing the full frame.
Zones are specified in the Zones tab of the Edit Settings window. To create a new zone:
...