...
Select the Teller ATM Transaction plug-in.
Click the Bound Cameras field then click the ... button.
In the Bind Plug-in to Cameras dialog box, click the check box beside each camera that should be associated with teller or ATM transactions.
Click OK to save your changes and return to the Configure panel.
...
After binding cameras to the plug-in (step 2.1), links will appear under Bound Cameras for each camera.
Click a link (for example Edit “1. ATM 89B Camera”) to edit the settings for that camera.
Type the ATM or Teller ID in the ATM/Teller ID box.
Type the IP address of the ATM or Teller Workstation in the IP Address box.
If desired, you may enter a name for the transaction source in the Computer Name box. This text will appear on event cards in 3VR OpCenter.
Click OK to save your changes and return to the Configure panel.
Repeat steps 2-4 for any remaining cameras bound to the Teller ATM Transaction plug-in.
...
In 3VR OpCenter, click the Monitor tab to go to the Monitor panel.
Click camera numbers to select the cameras bound to the Teller ATM Transaction plug-in.
Click the arrow below the camera selector to open the event type drop-down menu.
Select [ ]Transaction.
Click OK.
If the plug-in has been correctly configured, Transaction events will appear in the Monitor panel as they occur in real-time.
Verify that Transaction events are being generated correctly on all cameras bound to the plug-in during configuration.
...