Introduction
About This Guide
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Freedom screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Elevator Configuration
Elevator Management
In v9.2 Freedom each reader can only be assigned to one Door Area only. In order for Freedom to activate floor relays upon a card swipe, it now has a new Floor Controlled Area type that can link to a Door Area where the elevator reader resides. Each Floor Area contains outputs that would activate its corresponding elevator controls. In order for users to obtain access to floors, they would need to have both User Access Groups (for card access) and Floor Access Groups (for elevator/floor access).
...
Once the Controlled Area is saved, the Outputs and Unlock Schedule tabs appear.
Select a device Output for this Floor controlled area. You may select and add multiple Floor Areas. Click the plus sign button to add the selected Output(s).
To create an unlock schedule, click on the Unlock Schedule tab. Please see the Unlock Schedules section of the Controlled Areas chapter earlier in this document for more information.
Click Save.
Link Floor Areas to the Elevator Reader’s Door Area
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
Click on the System navigationtab.
On the left, click on the Enterphone MESH link.
In the Actions bar, click Add Panel. The following screen is displayed:
Enter the Panel ID. This ID number can be found in the sitepanel.ini file for this panel. See Mesh Parameter Files for more information.
In 9.2, when When panels are working as Global panels. Each , each panel in the Main-Peer network must have a unique Panel ID. The recommended ID’s would be to start from the default 10000 and onwards (e.g. 10000 Front Lobby Panel, 10001 Back Door Panel).
...