Introduction
About This Guide
...
First, the administrator needs to create Door Areas to hold the elevator readers. Then for each controlled area, “link” the corresponding Floor Areas to it. In the above example, a Door Area called Elevator A is created that hosts “Cab A Reader”. This door needs to have linked Floor Areas “Cab A - FL 1”, “Cab A – FL 2” and “Cab A - FL3” that contain relays to elevator A’s control:
...
Elevator B would follow the same idea except that it is using Elevator B reader, Floor Area Cab B – FL 1 through to FL 3.
Freedom offers two ways to handle Floor Access
...
...
Use separate Floor Access Groups
This is the original method implemented in 9.2 up to 10.1. The user will need to be assigned to a User Access Group that allows access to the various elevators. Floor Access Groups are then assigned to the user to give access to his floor.
...
This is how the Floor Access Group looks like for 1st Floor:
...
For the card holder that have access to the 1st Floor, this is how his User and Floor Access Groups look like:
...
...
No separate Floor Access Group
This is a new option implemented in later versions of 10.1 and 9.2c. It reduces database migration effort from older systems such as 9.1, 8.7 and below.
...
When assigning Access Group, the administrator will select a group that will give the card holder access to both elevators and his corresponding floor. Note that in this mode, the Floor Access Group select box is not present.
...
Controlled Area Configuration
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Freedom screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...