Introduction
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Freedom screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To add a certificate policy constraint to a certificate:
Go to System -> PIV -> Certificate Policies.
Click the tab that represents the certificate type of interest.
Enter the OID string (e.g. 2.16.840.1.101.3.2.1.48.11), enter the description text (optional) and click the + button.
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
MESH panels provide visitors with a way to communicate with tenants from the front common entrance. Tenants then can grant or deny access to the building. MESH panels display a list of users that can be dialed. For hardware installation please view the MESH Hardware Installation Guide.
By default MESH panels are added to a single controlled area. This allows the panel to grant access if the tenant presses the relay activation digit when dialed.
...
Add a Business using the instructions in the Businesses section of Chapter 10 Suites.
Add a new admin user using the instructions in the section: Site Administrator Management.
From the Add Admin User screen, select the business name from the Business list.
...