Introduction
About This Guide
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Freedom screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
Select the Controlled Area
Click the Geo Location tab.
For GPS based access, select GPS radio button.
Enter Latitude, Longitude, radius and the unit (e.g. Feet or Meter) which best cover the entrance area.
Click Enabled to activate Geo Location access for this area.
For Beacon based access, repeat steps 1 – 2 and click Beacon radio button instead.
Select the Unique ID from the Beacon dropdown list. For details on allocating Beacons in Freedom, see next section Configuring Beacon Access.
Click Enabled to activate Beacon access for the area.
...
5. Click Sync checkbox to enable periodic update to Beacon status information. Default behavior is every two hours.
...
Mobile Device Registration
...
Go to System -> Mobile.
Click Email Config.
Enter the email server’s address and the sender address of the registration email.
...
Configuring registration Email Template
Go to System -> Mobile.
Click menu item Mobile Onboard Email Template.
Enter Mail Subject Text, e.g. Mobile App Registration.
Enter Mail Content that shall contain links to download Mobile App, user password and any information that is valuable to the registration process.
A reserved token USER_PASSWORD can be embedded in the mail content which will then be replaced by the user password assigned during the registration process.
...
Managing Enterphone MESH Panels
...