Introduction
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Freedom screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
Log into Freedom.
Click on the System navigation tab.
On the left, click the Utilities link.
Click the Download sub link.
You will find the Print Utility installer (ffPrintUtilSetupPrintUtilSetup92b.exe) under Downloads. If not there please contact technical support. Save it to a Windows folder such as c:\tmp.
Note that the following instructions use Windows 710; the instructions should be very similar if you are currently running Windows 8.1 or slightly different in Windows 107. Windows XP and Windows Vista are no longer supported.
...
After installing the driver install the printer:
Click on the Start Search button at the bottom left of your computer and look for “Devices and Printers”“Printers & Scanners”.
Click on Add a printerPrinters & Scanners.
Choose Add a local printer.
or network printer with manual settings
Select Create a new port and select DTC… in the Type of port dropdown box. Click Next.
Enter the TCP/IP Printer Port address of the printer you will be using to print the badge cards and click Next.
Click Next again.
Click Finish.
If you installed the printer driver successfully it will be listed under Manufacturer.
Note: If installing a DTC4500 choose Fargo (not HID) and the desired printer model. In this case DTC4500e. Click Next.
Select Use the driver that is currently installed (recommended) and click Next.
Enter a name for the printer or keep the default. Make a note of the printer name – you will need to add this name to the Facility Friend Printer Utility later. Click Next.
Select Share this printer so that others on your network can find and use it and enter its Share name. Click Next.
Go back to folder where you downloaded the Facility Friend Print Utility installer (ffPrintUtilSetup.exe), e.g. c:\tmp, and double click on it.
Click on Next when you see the Welcome screen.
Choose an installation folder or stay with the program files default and click Next.
Click Install.
Once you see the final screen click Finish.
Right click Click on the Windows Taskbar Show Hidden Icon that is located in the bottom right hand corner of your screen. It looks something like this:
Click Customize notification icons:
Right click on taskbar and click Taskbar settings and click on Select Which Icons appear on the taskbar.
Locate the (Viscount) ffPrintUtil.exe print utility and select Show icon and notifications and click on OK at the bottom.
toggle the radio button to ON
Its icon will now appear on the bottom right where the other notification icons are displayed.
Right click on it and choose Open.
In the Select Printer dropdown box, select the name of the printer you entered in Step 10 of these instructions.
Click on the Configuration tab and note the port number (1024 is the default).
Click the white x to close the Facility Friend Print Utility.
...