Introduction
About This Guide
...
Click on the Access navigation tab.
Click on the User Access Groups, Floor Access Groups or Guest Access Groups link.
In the Actions bar, click on Add Access Group. The following screen is displayed:
Enter a Name and a Description.
Select the Risk Levels during which this group will have access: Low, Guarded, Elevated, High or Severe (the current risk level is always displayed at the top of the Freedom screen)
For more information on Risk Levels see the Alert Level Managementsection.Select a Controlled Area for this group.
Select a Schedule for the Controlled Area. If that controlled area is not going to be accessed by that User Access Group, leave the schedule as Always Off.
If you need an additional line for extra Controlled Areas and/or Schedules, click the + button beside the current line. To delete a line, click the x button.
Click Save.
Global User Access Groups
...
Create a new Controlled Area with the elevator reader.
In the new Controlled Area’s Floor tab, select all the associated Floor Areas; specify the desired activation time and click +.
...
Create a Floor Access Group
...
Click on the Events navigationtab.
On the left, click on the Reports link.
Click on the Attendance sub link.
Enter a From/To date and time.
Select the Zone Group(s) of interest.
Optionally select User Category of interest.
Optionally provide a Suite number, Card number, First or a Last name.
Select either CSV or PDF report type. The two additional types – CSV summary and PDF Summary reports would show daily card holder attendance summaries. All access transaction details are omitted.
Click the Search button.
Backup & Restore
...
To remove a Certificate Policy OID:
Click theX button next to the OID.
...
Extended Key Usage Extensions
...
To remove an extended key usage extension constraint:
Click the X button next to the OID.
...
PKI Fault Options
...
Enroll a PIV cardholder into Freedom by VeriCert.
Go to Users, edit the user profile.
Enable Admin function to the user.
Enter the logon User ID, password and appropriate privileges.
Click Save.
Add the PIV card's Root Certificate in System -> PIV -> Certificate Manager.
Restart Freedom server (System -> Utilities -> Reboot).
In Windows, make sure “Certificate Propagation Service” is enabled and started.
Insert PIV card into reader.
In Chrome browser, go to https://<FreedomServerIP>:8443/
Select the PIV Authentication Certificate for the card.
Enter PIN.
Once PIN is validated, the browse will log in to Freedom Admin.
...
Click on the System navigationtab.
On the left, click on the Administration link.
Click on the System Parameters sub link.
Click on the sitePanel.ini file.
Edit the line screensaverTimeOut=60; change 60 to any other value. Do not edit any other value.
Check the Reboot after save box. This will do a full restart of the panel after you save the file.
Click Save.
...
Click on the Events navigation tab.
Select a range of dates in the From and To Dates. Note that the maximum number of days is 31.
Change the Report Format at the bottom of the page to CSV Spreadsheet.
Click Search
Click Search
Download the search result in CSV Format.
Alarm Management System (AMS) Lite
...
With this version of freedom there were many enhancements to the ability quick search, and apply actions to the controlled areas. Including the ability to acknowledge and clear the alarms listed.
...
Number Of Pending Alarms
A Live Alarm List Count displays on the alarm icon on all screens and will indicate if there is an alarm on the sites that you have access to see.
...
Number of Pending Alarms by Site
...