...

1. Close the Velocity application.

2. Run the Bosch IDS Plugin. The IDS framework gets installed along with the Bosch IDS plugin.

   

3. The installer displays various status messages while the installation proceeds.

   Image RemovedImage Added

4. Click Yes to back up the database.

   Image RemovedImage Added

5. Click Yes to start the services after the update completes.

   Image RemovedImage Added

6. Click Yes to start Velocity when the Update completes.

   Image RemovedImage Added

   Image RemovedImage Added

   Image RemovedImage Added

7. When the following screen is displayed, type in the name and password of the Velocity Services Account and click the OK button. (The name and password of the Velocity Services account were specified when Velocity was installed.)

...

1. In RPS Menu, navigate to Automation/Remote App -> Automation Device.

2. In the Automation Device screen, select Mode 2 from the options to be the Data Value and click OK.
   

   Image RemovedImage Added

Adding a Bosch IDS Panel

...

1. Enter the Name, Vendor, Model Type, Time zone, IP Address, Port, and Automation Passcode.

2. Click OK.
   After the new panel is added, the Areas, Points, and Outputs are automatically displayed and populated below the panel.

   Image RemovedImage Added

Monitoring Bosch IDS Panels

...

1. Select Status Viewer from the Main menu.

2. Click Configure Status Group.

3. Enter the Status Group name In the Status Viewer Properties window.

   Image RemovedImage Added

4. From the Filter drop-down list, select the type of component you want to include in this status group. The 'Available' pane is populated with all devices/points corresponding to the filter chosen.

   Image RemovedImage Added

5. Click the right arrow to move the highlighted components in the 'Available' pane to the 'Selected' pane.

   Image RemovedImage Added

6. Click OK to save and return to the Status Viewer.

   1. The status viewer displays the status of the component that is added Online through Battery status and AC Power status.

      

   2. The Status Group for the corresponding Areas displays as shown.

      

   3. The Status Group for the corresponding Points displays as shown.

      

   4. The Status Group for the corresponding Outputs displays as shown.

...

1. Login as Velocity Superuser in Velocity Server.

2. Navigate from Main Menu-> Administration-> Roles->Operators.
   

   

   The Role Operators window displays.
   

   

3. Select Application Permissions->IDS Panels and enable the role for the desired functions (Add/Delete/Save/View). The operator must have view permission to access the IDS panel and perform any operation.

   Image RemovedImage Added

4. Select IDS Panels, IDS Areas, IDS Points, or IDS Outputs individually to give specific access.

   

...